Shenzhen Jelinn Technology Co., Ltd.
Shenzhen Jelinn Technology Co., Ltd.
Add to Cart
Deutsch 9 Pin J1939 Male to J1962 OBD2 OBDII Male CAN Bus Cable
Specification
| J1939 male receptacle | equivalent of Deutsch HD10-9-1939P |
| Type of J1939 male receptacle | Type 1 |
| Wire | 20AWG, pure copper |
| Material of J1939 male receptacle | PA66 + glass fiber |
| Material of OBD2 male plug | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and miss-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The end of Deutsch 9-Pin male connector can be overmolded or not, according to your needs. If the ends are overmolded, the cables are more sturdy and durable. If not overmolded, the price can be lower because the raw material and labour cost is saved.
Overmolded
Not overmolded
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this (4 pins connected):
| OBD2 male | Signal | J1939 male |
| 4 or 5 | Ground | A |
| 16 | Battery | B |
| 6 | J1939, CAN-H | C |
| 14 | J1939, CAN-L | D |
Sometimes, the pin assignment or pin out can also be like this (6 pins connected):
| OBD2 male | Signal | J1939 male |
| 4 or 5 | Ground | A |
| 16 | Battery | B |
| 6 | J1939, CAN-H | C |
| 14 | J1939, CAN-L | D |
| 2 | J1708-H | F |
| 10 | J1708-L | G |
The pin assignment or pin out can also be customized according to your needs. If there is no need for more pins to be connected, we suggest we just connect the necessary pins you need. If more pins are connected, the price of the cable will be higher because the raw material and labour cost will be higher.
Application
This cable will connect the 8 or 9 Pin GREEN type 2 OR 8 or 9 pin BLACK round style device such as the Cummins ZED, Garmin Elog or KeepTruckin ELD to your 16 Pin OBD2 style diagnostic port found on Volvo and Mac trucks post 2013 that have the OBD-II 16 pin port in dash.
You can connect 16 pin OBD2 male plug of this cable into your truck's 16 pin diagnostics port. The black 9 pin on other end will then accept some ELDs that have the round 8 OR 9 position plugs.
This adapter cable also allows a J1939 diagnostic device (a device designed to plug into the round J1939 9-pin Deutch connector on a vehicle) to be used with a J1939 equipped vehicle that uses a standard OBD2 style connector.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2 or J1708 cables, adapters or connectors in our website, feel free to let us know what J1939, OBD2 or J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)